š Free Worldwide Shipping on All Orders!Shop Now
Benson Amps Germanium Fuzz Snow White
THE BASICS
The Germanium Fuzz is a fuzz pedal. The knobs change the sounds. IMPORTANT: after plugging it into power (9vdcĀ only), it will take 2-3 minutes on average to sound correct. Good time to tune your guitar and grab a beverage. TheĀ color of the LED indicator light might change. Donāt turn the internal trimmer. THATāS IT. Read on only if you wantĀ some excellent primary source material for an online fuzz thesis.
SUMMARY
This pedal is designed around two germanium 2N527 OR 2N404 Germanium Transistors. They have been graded forĀ gain and leakage and carefully matched to sound their best. They are set up in the ubiquitous 60ās circular fuzzĀ topology, and tuned for good sound, and include some additional oddities aimed at solving the issues that preventĀ more widespread use of Germanium devices....detailed below.
THE FIRST FUZZ PEDAL WITH AUTOMATIC THERMAL BIAS TECHNOLOGY
The bias of the transistors in this pedal is automatically regulated by a circuit that GENTLY warms the transistors to aĀ preset operating point using analog components, and ensures a consistent sound, no matter the external temperature.
When the LED is orange, the transistors are warming up to increase their hFE (transistor gain) and to shift the bias pointĀ to the correct voltage. When the LED turns green, the warmer is off because the correct bias and hFE have been set.
Expect the LED to toggle back and forth every so often while the pedal is onā¦that is how you know its working. TheĀ heaters will warm the transistors enough to still be effective on a sunny stage, but far cooler than anything that wouldĀ harm the transistors. This pedal is designed to operate between freezing and 100ĖF but might still sound ne outsideĀ this range. There are two colors: Studio Black is not meant for direct sunlight, Solar White is new with it. We haveĀ found there is a 20ĖF difference between a black pedal and a white pedal in direct sunlight.
INPUT IMPEDANCE
The low input impedance of the classic two transistor germanium fuzz circuit is both a blessing and a curseā¦.a blessing because it can yield a tight sparkly clean tone when guitar volume is rolled down, and a curse because it soundsĀ nasty (in a bad way) if there are buffers or pedals before it in a signal chain. We went to some extremes to keep theĀ blessing and lose the curse.
We installed a class A buffer in the very input of the Germanium Fuzz. This buffer feeds a pickup simulator circuit (anĀ audio transformer set up as an inductor, a resistor, and a capacitor). These two additions make compatibility withĀ other pedals possible without losing the desired sound. After the pickup simulator circuit, we have added an āImpedanceā control, which simulates rolling down the guitar volume to get that tight sparkly soundā¦without adjusting your
guitar volumeā¦.which you can still do and still sounds great.
GAIN RANGE
The circuit has been tuned to be used as a rich sounding clean boost, an overdrive, all the way up to an aggressiveĀ fuzz with some octave overtones. There are many colors of tone available with the impedance and gainĀ controlsā¦they are very interactive. This is meant as a āprettyā fuzz a la 60ās-70ās classic rock/psychedelic rock. It isĀ not a spitty, harsh experimental fuzz and more often sounds like an overdrive or distortion (unless itās turned all theĀ way up). We call it a fuzz because it has a fuzzy character but it is so much more.
INTERNAL TRIMMER
Donāt turn the internal trimmer. It is precisely set at our factory. Turning the trimmer voids the warranty. The correctĀ trimmer position is marked in case you get one used where someone turned it.
POWER SUPPLY
This pedal is for use only with a 9vdc Boss style center negative power supply...There is no battery. Please do notĀ subject this pedal to more than 9vdc or the pedal or power supply could be destroyed. This pedal only draws 70maĀ when the heater is engaged, and far less than that when it is off. It will pull those 70ma instantaneously, which mostĀ power supplies have no issue with. With substandard or non standard power supplies it is possible the pedal will startĀ oscillating madly at the heater threshold, where the LED changes.
The Germanium Fuzz is a fuzz pedal. The knobs change the sounds. IMPORTANT: after plugging it into power (9vdcĀ only), it will take 2-3 minutes on average to sound correct. Good time to tune your guitar and grab a beverage. TheĀ color of the LED indicator light might change. Donāt turn the internal trimmer. THATāS IT. Read on only if you wantĀ some excellent primary source material for an online fuzz thesis.
SUMMARY
This pedal is designed around two germanium 2N527 OR 2N404 Germanium Transistors. They have been graded forĀ gain and leakage and carefully matched to sound their best. They are set up in the ubiquitous 60ās circular fuzzĀ topology, and tuned for good sound, and include some additional oddities aimed at solving the issues that preventĀ more widespread use of Germanium devices....detailed below.
THE FIRST FUZZ PEDAL WITH AUTOMATIC THERMAL BIAS TECHNOLOGY
The bias of the transistors in this pedal is automatically regulated by a circuit that GENTLY warms the transistors to aĀ preset operating point using analog components, and ensures a consistent sound, no matter the external temperature.
When the LED is orange, the transistors are warming up to increase their hFE (transistor gain) and to shift the bias pointĀ to the correct voltage. When the LED turns green, the warmer is off because the correct bias and hFE have been set.
Expect the LED to toggle back and forth every so often while the pedal is onā¦that is how you know its working. TheĀ heaters will warm the transistors enough to still be effective on a sunny stage, but far cooler than anything that wouldĀ harm the transistors. This pedal is designed to operate between freezing and 100ĖF but might still sound ne outsideĀ this range. There are two colors: Studio Black is not meant for direct sunlight, Solar White is new with it. We haveĀ found there is a 20ĖF difference between a black pedal and a white pedal in direct sunlight.
INPUT IMPEDANCE
The low input impedance of the classic two transistor germanium fuzz circuit is both a blessing and a curseā¦.a blessing because it can yield a tight sparkly clean tone when guitar volume is rolled down, and a curse because it soundsĀ nasty (in a bad way) if there are buffers or pedals before it in a signal chain. We went to some extremes to keep theĀ blessing and lose the curse.
We installed a class A buffer in the very input of the Germanium Fuzz. This buffer feeds a pickup simulator circuit (anĀ audio transformer set up as an inductor, a resistor, and a capacitor). These two additions make compatibility withĀ other pedals possible without losing the desired sound. After the pickup simulator circuit, we have added an āImpedanceā control, which simulates rolling down the guitar volume to get that tight sparkly soundā¦without adjusting your
guitar volumeā¦.which you can still do and still sounds great.
GAIN RANGE
The circuit has been tuned to be used as a rich sounding clean boost, an overdrive, all the way up to an aggressiveĀ fuzz with some octave overtones. There are many colors of tone available with the impedance and gainĀ controlsā¦they are very interactive. This is meant as a āprettyā fuzz a la 60ās-70ās classic rock/psychedelic rock. It isĀ not a spitty, harsh experimental fuzz and more often sounds like an overdrive or distortion (unless itās turned all theĀ way up). We call it a fuzz because it has a fuzzy character but it is so much more.
INTERNAL TRIMMER
Donāt turn the internal trimmer. It is precisely set at our factory. Turning the trimmer voids the warranty. The correctĀ trimmer position is marked in case you get one used where someone turned it.
POWER SUPPLY
This pedal is for use only with a 9vdc Boss style center negative power supply...There is no battery. Please do notĀ subject this pedal to more than 9vdc or the pedal or power supply could be destroyed. This pedal only draws 70maĀ when the heater is engaged, and far less than that when it is off. It will pull those 70ma instantaneously, which mostĀ power supplies have no issue with. With substandard or non standard power supplies it is possible the pedal will startĀ oscillating madly at the heater threshold, where the LED changes.
$370.82
Benson Amps Germanium Fuzz Snow Whiteā
$370.82
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
THE BASICS
The Germanium Fuzz is a fuzz pedal. The knobs change the sounds. IMPORTANT: after plugging it into power (9vdcĀ only), it will take 2-3 minutes on average to sound correct. Good time to tune your guitar and grab a beverage. TheĀ color of the LED indicator light might change. Donāt turn the internal trimmer. THATāS IT. Read on only if you wantĀ some excellent primary source material for an online fuzz thesis.
SUMMARY
This pedal is designed around two germanium 2N527 OR 2N404 Germanium Transistors. They have been graded forĀ gain and leakage and carefully matched to sound their best. They are set up in the ubiquitous 60ās circular fuzzĀ topology, and tuned for good sound, and include some additional oddities aimed at solving the issues that preventĀ more widespread use of Germanium devices....detailed below.
THE FIRST FUZZ PEDAL WITH AUTOMATIC THERMAL BIAS TECHNOLOGY
The bias of the transistors in this pedal is automatically regulated by a circuit that GENTLY warms the transistors to aĀ preset operating point using analog components, and ensures a consistent sound, no matter the external temperature.
When the LED is orange, the transistors are warming up to increase their hFE (transistor gain) and to shift the bias pointĀ to the correct voltage. When the LED turns green, the warmer is off because the correct bias and hFE have been set.
Expect the LED to toggle back and forth every so often while the pedal is onā¦that is how you know its working. TheĀ heaters will warm the transistors enough to still be effective on a sunny stage, but far cooler than anything that wouldĀ harm the transistors. This pedal is designed to operate between freezing and 100ĖF but might still sound ne outsideĀ this range. There are two colors: Studio Black is not meant for direct sunlight, Solar White is new with it. We haveĀ found there is a 20ĖF difference between a black pedal and a white pedal in direct sunlight.
INPUT IMPEDANCE
The low input impedance of the classic two transistor germanium fuzz circuit is both a blessing and a curseā¦.a blessing because it can yield a tight sparkly clean tone when guitar volume is rolled down, and a curse because it soundsĀ nasty (in a bad way) if there are buffers or pedals before it in a signal chain. We went to some extremes to keep theĀ blessing and lose the curse.
We installed a class A buffer in the very input of the Germanium Fuzz. This buffer feeds a pickup simulator circuit (anĀ audio transformer set up as an inductor, a resistor, and a capacitor). These two additions make compatibility withĀ other pedals possible without losing the desired sound. After the pickup simulator circuit, we have added an āImpedanceā control, which simulates rolling down the guitar volume to get that tight sparkly soundā¦without adjusting your
guitar volumeā¦.which you can still do and still sounds great.
GAIN RANGE
The circuit has been tuned to be used as a rich sounding clean boost, an overdrive, all the way up to an aggressiveĀ fuzz with some octave overtones. There are many colors of tone available with the impedance and gainĀ controlsā¦they are very interactive. This is meant as a āprettyā fuzz a la 60ās-70ās classic rock/psychedelic rock. It isĀ not a spitty, harsh experimental fuzz and more often sounds like an overdrive or distortion (unless itās turned all theĀ way up). We call it a fuzz because it has a fuzzy character but it is so much more.
INTERNAL TRIMMER
Donāt turn the internal trimmer. It is precisely set at our factory. Turning the trimmer voids the warranty. The correctĀ trimmer position is marked in case you get one used where someone turned it.
POWER SUPPLY
This pedal is for use only with a 9vdc Boss style center negative power supply...There is no battery. Please do notĀ subject this pedal to more than 9vdc or the pedal or power supply could be destroyed. This pedal only draws 70maĀ when the heater is engaged, and far less than that when it is off. It will pull those 70ma instantaneously, which mostĀ power supplies have no issue with. With substandard or non standard power supplies it is possible the pedal will startĀ oscillating madly at the heater threshold, where the LED changes.
The Germanium Fuzz is a fuzz pedal. The knobs change the sounds. IMPORTANT: after plugging it into power (9vdcĀ only), it will take 2-3 minutes on average to sound correct. Good time to tune your guitar and grab a beverage. TheĀ color of the LED indicator light might change. Donāt turn the internal trimmer. THATāS IT. Read on only if you wantĀ some excellent primary source material for an online fuzz thesis.
SUMMARY
This pedal is designed around two germanium 2N527 OR 2N404 Germanium Transistors. They have been graded forĀ gain and leakage and carefully matched to sound their best. They are set up in the ubiquitous 60ās circular fuzzĀ topology, and tuned for good sound, and include some additional oddities aimed at solving the issues that preventĀ more widespread use of Germanium devices....detailed below.
THE FIRST FUZZ PEDAL WITH AUTOMATIC THERMAL BIAS TECHNOLOGY
The bias of the transistors in this pedal is automatically regulated by a circuit that GENTLY warms the transistors to aĀ preset operating point using analog components, and ensures a consistent sound, no matter the external temperature.
When the LED is orange, the transistors are warming up to increase their hFE (transistor gain) and to shift the bias pointĀ to the correct voltage. When the LED turns green, the warmer is off because the correct bias and hFE have been set.
Expect the LED to toggle back and forth every so often while the pedal is onā¦that is how you know its working. TheĀ heaters will warm the transistors enough to still be effective on a sunny stage, but far cooler than anything that wouldĀ harm the transistors. This pedal is designed to operate between freezing and 100ĖF but might still sound ne outsideĀ this range. There are two colors: Studio Black is not meant for direct sunlight, Solar White is new with it. We haveĀ found there is a 20ĖF difference between a black pedal and a white pedal in direct sunlight.
INPUT IMPEDANCE
The low input impedance of the classic two transistor germanium fuzz circuit is both a blessing and a curseā¦.a blessing because it can yield a tight sparkly clean tone when guitar volume is rolled down, and a curse because it soundsĀ nasty (in a bad way) if there are buffers or pedals before it in a signal chain. We went to some extremes to keep theĀ blessing and lose the curse.
We installed a class A buffer in the very input of the Germanium Fuzz. This buffer feeds a pickup simulator circuit (anĀ audio transformer set up as an inductor, a resistor, and a capacitor). These two additions make compatibility withĀ other pedals possible without losing the desired sound. After the pickup simulator circuit, we have added an āImpedanceā control, which simulates rolling down the guitar volume to get that tight sparkly soundā¦without adjusting your
guitar volumeā¦.which you can still do and still sounds great.
GAIN RANGE
The circuit has been tuned to be used as a rich sounding clean boost, an overdrive, all the way up to an aggressiveĀ fuzz with some octave overtones. There are many colors of tone available with the impedance and gainĀ controlsā¦they are very interactive. This is meant as a āprettyā fuzz a la 60ās-70ās classic rock/psychedelic rock. It isĀ not a spitty, harsh experimental fuzz and more often sounds like an overdrive or distortion (unless itās turned all theĀ way up). We call it a fuzz because it has a fuzzy character but it is so much more.
INTERNAL TRIMMER
Donāt turn the internal trimmer. It is precisely set at our factory. Turning the trimmer voids the warranty. The correctĀ trimmer position is marked in case you get one used where someone turned it.
POWER SUPPLY
This pedal is for use only with a 9vdc Boss style center negative power supply...There is no battery. Please do notĀ subject this pedal to more than 9vdc or the pedal or power supply could be destroyed. This pedal only draws 70maĀ when the heater is engaged, and far less than that when it is off. It will pull those 70ma instantaneously, which mostĀ power supplies have no issue with. With substandard or non standard power supplies it is possible the pedal will startĀ oscillating madly at the heater threshold, where the LED changes.
